Heavy-duty shelves have large load-bearing capacity, wide practicality, convenient mechanical handling and storage operations, and can adjust the height of each layer freely.

      There are two things to note when installing heavy-duty shelves. The lower point is that the length direction and height direction of the heavy-duty shelf should be at a right angle to the newspaper. This type of installation can be installed completely and correctly. Usually we call this straightness. In another important dimension, stability is important. Heavy-duty shelves are firm and unstable, and stability and instability directly determine the quality and practical life of heavy-duty shelves. So, at the bottom of the column, we also need to make a fix on the top of the heavy shelf. This is because the column is prone to offset when the height of the heavy-duty shelf is constant. It is easy to disperse without fixing.

      The important thing is to say three times: the shelves must be cleared. Heavy-duty shelves themselves have certain importance, and it is best not to appear on the dismantling site, and the number of unpacking should not be too much. This is because there are more people, if not precision training and norms. The probability of being innocent on the shelf will be much greater. Demolition staff should also bring a seat belt and fasten the safety rope. Be prepared for everything.

      The removal steps for heavy-duty shelves are also very particular. First, remove the safety pin between the beam and the post of the shelf. If this step is first disassembled, then the latter work will be carried out very well. It should be noted that because of the long-term carrying of heavy objects, the safety pin will be tighter, and the forklift will generally be used to assist the work. After the safety pin is removed. According to the principle of going from top to bottom and from outside to inside, the beam is first removed and the column is removed. The purpose of this is to prevent gravity from pulling the beam down when there is no support. Causes a safety hazard.

      It should be noted that the installation and disassembly of heavy-duty shelves requires the operation of skilled workers. If you are a new person, please do so under the guidance of the master. Avoid new people blindly operating. Adhering to the installation and patience. Disassemble the principle of care.